Stealth Cam STC-G42C, Инструкция по эксплуатации

Страница: 14 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
14
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
Using the UP and DOWN arrows will allow the setting to be change from 00 to 59. Again when this
setting is on the appropriate minute, press the RIGHT arrow key to move to the AP (am/pm) setting
and it will start to blink. Using the UP and DOWN arrows will allow the setting to be changed from
AM to PM.
§
TL STOP – 08:00AM (default): This setting is used to give the camera the stop time for when to end
the time-­‐lapse photography. The default format is in a HH/MM/AP setup, should the time format
be in 24 hour the format will be HH/MM. With the HH (hour) setting to blinking, use the UP and
DOWN arrows to allow the setting to be changed from 1 to 12. Once this setting is on the
appropriate hour, press the RIGHT arrow key to move to the MM (minute) setting and it will start to
blink. Using the UP and DOWN arrows will allow the setting to be change from 00 to 59. Again
when this setting is on the appropriate minute, press the RIGHT arrow key to move to the AP
(am/pm) setting and it will start to blink. Using the UP and DOWN arrows will allow the setting to
be changed from AM to PM.
§
REDUCE BLUR – ADVANCED (default): This is used to determine if the camera should use the
MATRIX Blur reduction technology to dramatically reduce the blur effect resulting in clearer night
time infrared shots. (STANDARD) Minimizes blurring effect in images whlle retaining long-­‐range
night image capability. (ADVANCED) Maximum blur reduction achieved through a faster shutter
speed. This setting my cause a slight reduction in night time range and increased grain in the image.
With this option blinking, pressing the UP or DOWN arrow buttons will cause the camera to cycle
between the two options of STANDARD or ADVANCED.
EXAMPLE: Data Stamping on the bottom portion of the picture indicates the camera took a picture in
Time Lapse (TL) mode.