Stealth Cam STC-G42C, Инструкция по эксплуатации

Страница: 8 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
8
CAMERA PROGRAMMING – CUSTOM (CONT)
CUSTOM – This is the fifth setting and is defined by the user. When the camera is changed to this
mode, the display screen will reflect the last program setting: Number of images on the memory
card, Countdown timer and Battery percentage.
PHOTO 00000
00:30 100%
The system default programming is set to 5MP, 5-­‐second timeout delay and 1 Photo Burst. The
30-­‐second timer on the lower left of the display will count down towards 0 showing how much
time is left to enter the Custom configuration mode. Should no change be made, the system will
give an additional 30 seconds for the operator to move out of the coverage area before the
camera becomes active.
To make changes to the programming, press the
MENU button to enter the configuration menu
before the countdown reaches zero. When in the MENU configuration, pressing the DOWN
arrow button will move the configuration to the next setting option. Pressing the ENTER button
on the listed configuration option will cause the option to blink and allow it to be changed.
Pressing
ENTER again once an option has been changed will set the new configuration, save it to
the camera’s memory, and return to selection section of the MENU configuration. Once all the
settings have been changed to the operator’s desired settings pressing the MENU button will
return to the initial display and the 30-­‐second timer will start the countdown again. The
following are the options and descriptions of how to change the configuration: