Stealth Cam STC-G42C, Инструкция по эксплуатации

Страница: 9 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
9
CAMERA PROGRAMMING – CUSTOM (CONT)
Ø
SETUP DATE : This setting is used to give the camera the correct date to use on the Info Bar
of the images. The format is in a MM/DD/YY setup. With the MM (month) setting blinking,
use the UP and DOWN arrows to be change the setting from 1 to 12. Once this setting is on
the appropriate month, press the RIGHT arrow key to move to the DD (day) setting and it
will start to blink. Using the UP and DOWN arrows will allow the setting to be change from 1
to 31 based upon the MM that has previously set. Again when this setting is on the
appropriate day, press the RIGHT arrow key to move to the YY (year) setting and it will start
to blink. Using the UP and DOWN arrows will allow the setting to be changed from 14 to 35.
Ø
SETUP TIME – CST (default): This setting is used to give the camera the correct time to use
on the Info Bar of the images. By default it will be setup for Central Standard Time (CST).
The default format is in a HH/MM/AP setup. With the HH (hour) setting blinking, use the UP
and DOWN arrows to change from 1 to 12. Once this setting is on the appropriate hour,
press the RIGHT arrow key to move to the MM (minute) setting and it will start to blink.
Using the UP and DOWN arrows will allow the setting to be change from 00 to 59. Again
when this setting is on the appropriate minute, press the RIGHT arrow key to move to the
AP (am/pm) setting and it will start to blink. Using the UP and DOWN arrows will allow the
setting to be changed from AM to PM.
Ø
TIME ZONE – CST (default): This allows you to set your camera to different time zones. By
pressing the ENTER button and choosing between the following options below and pressing
Enter again, you will save your selection. Eastern, Central, Mountain, Pacific, Alaskan,
Hawaiian.