Stealth Cam STC-G42C, Инструкция по эксплуатации

Страница: 21 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
21
BATTERY REMOVAL & INSTALLATION
To remove the batteries from the unit; open the case
and press the EJECT button on the lower right hand
corner. This will cause the battery tray to be released
and slide downwards.
New, Alkaline or Lithium, ‘AA’ batteries must be inserted
with the orientation as shown on the tray. As with most
electronic devices the negative (
-­‐ ) orientation of the
batteries should be against the springs. Failure to insert
the batteries properly will cause damage to the unit.
To reinsert the battery tray; position the tray so the base
of the tray matches with the opening at the bottom of the camera. The tray is notched so that
incorrect insertion of the battery tray is not possible. With the orientation correct simply slide the
battery tray into its final locked position. Should the battery tray not willingly slide into it
destination, remove the tray and examine the area of possible debris that may be causing the
issue.
NOTE: Replacing the batteries will not reset the cameras current configurations.
**WARNING**
Do not mix new and old batteries.
Remove batteries from the tray if the unit will not be in use for extended period of time .