Stealth Cam STC-G42C, Инструкция по эксплуатации

Страница: 15 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
15
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
Ø
CAMERA NAME – STEALTH CAM (default): This setting is used to identify the camera on the
Info Bar. It can be up to 13 characters long in the form of alpha (A-­‐Z), numeric (0-­‐9), or
spaces. With this option blinking, use the UP or DOWN arrow buttons to change the initial
character. Once the blinking character has been changed, use the RIGHT arrow button to
continue to the next character. Repeat until the desired name is entered. When finished
press the ENTER button again to confirm and store the new camera name. Pressing the
DOWN arrow key will move the display to the next configuration option.
Ø
TEMPERATURE – FAHRENHEIT (default): This setting is used to tell camera if the
temperature reading on the Info Bar should be in Fahrenheit or Celsius. With this option
blinking, pressing the UP or DOWN arrow buttons will cause the camera to cycle between
the two options.
Ø
INFO BAR – ON (default): This setting is used to tell camera if the Info Bar should be
displayed at the bottom of images and video or not. With this option blinking, pressing the
UP or DOWN arrow buttons will cause the camera to cycle between the two options of ON
or OFF.
Ø
LATITUDE – 000.000000N (default): This setting is used for the GEO-­‐TAG of the camera. It
will not be displayed on the images directly, but rather on the background image
information. The coordinates can be changed from 000.000000 to 179.999999 and either N
(North) or S (South). With this option blinking, use the UP or DOWN arrow buttons to
change the initial number blinking. Once the number is correct use the RIGHT arrow button
to continue to the next value. Repeat until the final desired numeric sequence is entered.