6
2. SAFETY INSTRUCTIONS
EN
• Do not attempt to repair the appliance yourself. The repair of these electric
appliances can be performed only by qualified technicians in the authorised
STATUS service centres using original spare parts. Incorrect repair may cause
considerable danger for the operator.
• Only use original STATUS spare parts and accessories. The use of non approved
parts or accessories may be a possible source of danger and will cause the
guarantee to become void.
• Check the float often.
▪ If you notice liquid leaking from your appliance, switch it off immediately and
unplug it.
• Do not put the appliance in water. Make sure that water is not spilled on the
appliance.
• When disposing of the wastewater, make sure that you observe any legal
regulations.
• Only store the appliance in a safe and dry location outside the reach of children.
• Always keep the appliance clean. Don't use any solvents or cleaners that contain
solvents for cleaning.
Please pay particular attention to the following "Special Safety Information"
SPECIAL SAFETY INFORMATION
• Never vacuum up hot ashes or pointed or sharp objects.
• Never use the appliance in damp rooms.
• Do not use the appliance without a dust bag (an exception is wet vacuuming).
Make sure that the dust bag is inserted into the appliance correctly.
• When using the appliance, make sure that no hair, clothing, or members are
drawn in.
• Keep the vacuum cleaner away from heat sources such as radiant heaters,ovens.
• In order to operate this electric appliance properly you must observe the safety
regulations, the assembly directions and the operating instructions specified in this
Manual. All users must be acquainted with this Manual and informed on the
potential risks during operating the electric appliance.
• Children, disabled and aged persons are often not aware of the dangers that can
result from handling electric appliances. The above mentioned groups must never
work with this electrical appliance. It is also imperative that you observe the
accident prevention regulations in force in your area. The same applies for general
rules of occupational health and safety.
• The manufacturer shall not be liable for any changes made to the appliance nor
for any damage resulting from such changes.
7
3. KNOW YOUR PRODUCT
EN
KNOW YOUR PRODUCT
1. Handle
2. Upper section
3. ON/OFF switch
4. Built-in socket
5. Clamps
6. Tank
7. Hose connection
8. Drain outlet (ALS 1031SF)
9. Hose set
10. Air control handle
WARNING!
In the specification are all possible adaptation which may be included product.
Real grade products described in the "ACCESSORIES".
UNPACKING
Due to modern mass production techniques, it is unlikely that your electric appliance
is faulty or that a part is missing. If you find anything wrong, do not operate the
appliance until the parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Carefully unpack the contents of the box.
1. Hold the two clamps (5) fastening the upper section (2) in its position and fold
them upwards (Fig.A).
2. Loosen the clamps, remove the upper section and take out the contents from the
tank.
Please check the parts using the list shown above to make sure they are complete
and that there has been no damage in transport.
ASSEMBLY
• Hold the two clamps fastening the upper section in its position and fold them
upwards.
• Loosen the clamps and lift the upper section outwars.
• Turn the tank upside down on a stable leveled clean surface.
• Fasten the assembled to their pedestals big rear wheels to the tank with
screws
• Place the tank back in normal position.
• Insert a filter appropriate for the work to be done.
• Place the upper section back on the tank.
• Align the upper section with the clamps.
• Attach the clamps to the upper section and press them downwards until an audible
"click" is heard.
• Insert the larger end of the hose (9) into the tank front inlet (7) (Fig.A). Align the
locking the tab on the hose fitting with a bracket at the top of the pipe.
Further fitting forward until it clicks. The hose must be securely fixed.
• Select an appropriate nozzle and/or hose and attach them to the hose (9).
11. Metal telescopic tube
12. Floor nozzle
13. Crevice nozzle
14. Adaptor for power tools mounting tube
15. Adaptor for power tools
16. HEPA filtre
17. Sponge filter
18. Paper dust bag
