StarTrac Elliptical Edge, Руководство по обслуживанию

Страница: 40 / 74

Shuttle Replacement
NOTE: Adjust the posi-
tion of the skate rail as
needed to allow removal
of the crank arm shaft.
6. Using 1/2-in. hex head socket wrench and 1/2-in, open-end wrench, remove the front
stride belt pulley (and bolt) from inside the skate rail.
See Diagram I.
NOTE: MAKE SURE
the two Allen screws
engage the flats on the
crank arm shaft.
STRIDE BELT
5 o
I
NOTE: You may need
to adjust the shuttle to
remove excess side-
play (see Section 2 for
details).
5.13
7. Using 5/32-in. Allen wrench, remove the two Allen screws from the crank arm. See Dia
gram J.
5. CAREFULLY slide the crank arm shaft and two nylon washers out of the skate rail. BE
CAREFUL notto lose the two nylon washers.
6. Slide the shuttle forward and off of the skate rail.
Elliptical Edge Service Manual