StarTrac Elliptical Edge, Руководство по обслуживанию

Страница: 38 / 74

Battery Replacement
Tools Required:
Phillips head screwdriver
Remove the front shroud:
1. Using Phillips head screwdriver, remove the eight Phillips head screws from the
shroud.
2. Lift the front shroud off the unit.
Remove the battery:
NOTE: DO NOT pull
on the wires when dis-
connecting from the
NOTE: When installing
the
make sure
the negative (-) termi-
nal is positioned at the
top.
1. CAREFULLY disconnect the black (-) and red (+) lead wires from the battery terminals by
grasping and pulling the wire connectors.
2. Using Phillips head screwdriver, remove the two screws securing the battery to the frame;
remove the battery.
See Diagram F.
Diag. F
Install the battery:
1. Position the new battery on the frame. Using Phillips head screwdriver, install the two
Phillips head screws through the battery to secure the battery to the frame. TIGHTEN
THE SCREWS FIRMLY.
2. Connect the lead wires to the battery:
• Connect the black (-) lead wire to the.top battery terminal marked (-)
• Connect the red (+) lead wire to the bottom battery terminal marked (+).
Install the front shroud:
1. Install the front shroud in position on the unit.
2.
Using Phillips head screwdriver, secure the front shroud to unit with the eight
head
Elliptical Edge Service Manual
5.11