Instruction Manual
64
LACP enabled
Controls whether LACP is enabled on this switch port. LACP will
form an aggregation when two or more ports are connected to
the same partner. LACP can have up to 12 LLAGs per switch and
GLAGs per stack..
Key
The Key value incurred by the port.(Range is 1 to 65535.) The
“Auto” setting will set the key as appropriate by the physical link
speed, 10Mb=1, 100Mb=2, 1Gb=3. Using the specific setting, a
user-defined value can be entered. The same key setting ports
can participate in the same aggregation group.
Role
The Role shows the LACP activity status. The “Active” will transmit
LACP packets each second, while “Passive” will wait for a LACP
packet from a partner.
Timeout
The Timeout controls the period between BPDU transmissions.
“Fast” will transmit LACP packets each seconds, while “Slow” will
wait for 30 seconds before sending an LACP Packet.
Prio
The Prio controls the priority of the port. If the LACP partner
wants to form a larger group than is supported by this device,
then this parameter will control which ports will be active and
which ports will be in a backup role. Lower number means
greater priority.
1. On the main screen of the Web management UI, click
Configuration
>
Aggregation
>
LACP
.
2. Enable LACPS on all of the ports in an LAG.
3. Divide the LAG by a different key.
4. Set the
Role
of at least one port to
Active
.
5. To save your settings, click
Save
.
To restore the previous settings, click
Reset
.
