manualshive.com logo in svg

StarTech.com IES101002SFP, Инструкция по эксплуатации

Поделиться
Скачать
StarTech.com IES101002SFP Скачать руководство пользователя страница 164

Instruction Manual

156

7. Streaming Video - for use by broadcast or multicast based 

video content distribution and other similar applications 

supporting streaming video services that require specific 

network policy treatment. Video applications relying on 

TCP with buffering would not be an intended use of this 

application type.
8. Video Signalling - for use in network topologies that require 

a separate policy for the video signalling than for the video 

media.

Policy

Policy indicates that an Endpoint Device wants to explicitly 

advertise that the policy is required by the device. Can be 

either 

Defined

 or 

Unknown

:

Unknown

: The network policy for the specified application 

type is currently unknown.

Defined

: The network policy is defined.

TAG

TAG is indicative of whether the specified application type 

is using a tagged or an untagged VLAN. Can be 

Tagged

 or 

Untagged

.

Untagged

: The device is using an untagged frame format 

and as such does not include a tag header as defined by IEEE 

802.1Q-2003.

Tagged

: The device is using the IEEE 802.1Q tagged frame 

format.

VLAN ID

VLAN ID is the VLAN identifier (VID) for the port as defined 

in IEEE 802.1Q-2003. A value of 1 through 4094 is used to 

define a valid VLAN ID. A value of 0 (Priority Tagged) is used if 

the device is using priority tagged frames as defined by IEEE 

802.1Q-2003, meaning that only the IEEE 802.1D priority level 

is significant and the default PVID of the ingress port is used 

instead.

Priority

Priority is the Layer 2 priority to be used for the specified 

application type. One of the eight priority levels (0 through 7).

DSCP

DSCP is the DSCP value to be used to provide Diffserv node 

behavior for the specified application type as defined in IETF 

RFC 2474. Contain one of 64 code point values (0 through 63).

Auto-negotiation

Auto-negotiation identifies if MAC/PHY auto-negotiation is 

supported by the link partner.

Содержание IES101002SFP



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды