Starcraft Travel Star, Руководство пользователя

Страница: 79 / 96

SECTION 10
STARCRAFT TOWABLE CAMPING & OPERATING
H
IDE
-A-B
ED
(I
F
S
O
E
QUIPPED
)
The hide-a-bed sofa functions much the same
as a regular residential hide-a-bed sofa. To
make the hide-a-bed sofa into a bed, remove
the seat cushions and pull the sofa back
towards you firmly and gently. Activate (or
deflate) the air mattress (if so equipped) using
the supplied furniture manufacturer’s
instructions. To convert the hide-a-bed back
into the upright sofa position, reverse the
process .
J-S
TEEL
S
OFA
(I
F
S
O
E
QUIPPED
)
The J-steel sofa functions much the same as
a residential futon. To make the J-steel sofa
in to a bed, lift up on the bottom seat cushion
and pull it towards you.
The sofa back will drop down to provide a
sleeping surface. For additional comfort and
to reduce fabric damage, you may want to
place a cover or air mattress (customer
supplied) over the J-steel sofa when it is in
the sleeping position.
B
OOTH
D
INETTE
(I
F
S
O
E
QUIPPED
)
The dinette is designed to seat up to four
adults. You can access the dinette bench
storage by removing all the cushions and
lifting the bottom seat supports. If the dinette
bottom seat support is screwed shut, it is to
protect factory-installed equipment (do not
use that area for storage). To convert back to
a booth dinette, reverse the process.
The booth dinette can be converted into a
bed. To convert, remove all the cushions from
the booth dinette. Lift the tabletop, remove the
detachable table legs and place the tabletop
on the ledges provided between the booth
dinette benches. Lay the seat back cushions
against the back of the booth dinette bench.
Lay the dinette seat bottom cushions in
between the seat back cushions. The area
where the cushions meet should be slightly
raised. Push the raised cushion ends down
gently. The cushions are designed to fit
snugly. Reverse this process when converting
back to the booth dinette.
F
REE
S
TANDING
T
ABLE
& C
HAIRS
(I
F
S
O
E
QUIPPED
)
The free standing dinette table can be
positioned to seat up to four people. To
prevent damage, the standard free-standing
dinette chairs should be fastened securely at
the dinette table when you are traveling
TV P
OWER
S
UPPLY
For good station reception, the
TV power supply must be
turned ON to view local
television stations. Turning the
TV power supply ON sends
12-volt DC through the cable
to the TV roof antenna. The
voltage energizes the
transistors in the antenna
head amplifier.
Fig. 10.2 TV
Power Supply
Turn the TV power supply OFF
to view cable or satellite
television, or to use a VCR or
DVD..
TV A
NTENNA
, C
ABLE
TV & S
ATELLITE
(I
F
S
O
E
QUIPPED
)
RG-6 coax runs from the TV antenna and
exterior cable TV connector to a wall plate
near the dedicated television space.
The television entertainment system will not
run cable television on one television set and
local stations off the other set without
customer modification. You can either view
local stations or you can view cable television
.
TV antenna
To raise the TV antenna to the
operating position turn the
antenna elevating crank
clockwise in the UP direction
until some resistance to turning
is noted.
Fig. 10.3
On amplified models, 12-volt DC power is
required (refer to the manufacturer’s owners
manual). After the antenna is in the full UP
position, pull down on the round knob with
both hands until it disengages from the ceiling
plate.
10 - 3