Starcraft Travel Star, Руководство пользователя

Страница: 75 / 96

SECTION 9
TOWABLE SLIDEOUT SYSTEM
Fig 8.4 Crank Handle
MANUAL OPERATION - IN FRAME
Fig 8.5 Hex Head Crank Extension
Fig 8.6 Ratchet
Schwintek Inwall slideout system
The Schwintek system comes with an
“electronic” manual override. In event the
slide out does not extend or retract follow
these steps to override the system:
1. Locate the slideout system circuit board.
2. Press the “mode button” six times quickly,
press a 7
th
time and hold for
approximately 5 seconds.
3. The red and green LED lights will begin to
flash indicating you are in override mode.
4. Using the wall switch, press and hold the
“in” button until the unit comes completely
in.
Fig 8.7 Slideout System Circuit Board
During this override procedure the
motors are not synchronized. Visually
watch the room, and if one side is
moving significantly slower than the
other (or not at all), immediately stop
and call your dealer or Jayco Customer
Service.
If the system stalls our before reaching
end of stroke OR if the room does not
close and seal tightly, call your dealer
or Jayco Customer Service.
9 - 3