Starcraft Travel Star, Руководство пользователя

Страница: 51 / 96

SECTION 6
STARCRAFT TOWABLE PROPANE SYSTEM
5. Place the cylinder on the bracket provided
on the A-frame and position it so the outlet
of the cylinder valve is pointed directly
outward to the curbside wall.
6. If a vinyl cylinder cover is provided, slip it
over the cylinder and leave the zipper
open (if so equipped).
7. Attach the 1/4" inverted flare x 24" Type 1
pigtail hose to the regulator inlet and the
right hand swivel nut to the cylinder valve.
8. If applicable, close the cylinder cover
zipper (if so equipped) up to the hose.
9. Secure the cylinder to the A-frame bracket
using the bolts, nuts and washers
provided.
Double Cylinder Mounted On A-Frame
When a second cylinder is installed, a tee
check valve is used to replace the 90° elbow
at the top of the regulator and another 1/4"
inverted flare x 24" Type 1 pigtail is added.
The regulator stays in the original position.
Fig. 6.6 Double cylinder
1. Place the second cylinder on the A-frame
bracket so the cylinder valve is pointed to
the roadside of the folding camping trailer.
2. Secure the second cylinder to the A-frame
using the bolts, nuts and washers
provided.
3. If a vinyl cylinder cover is used, slip it over
the new single cylinder, or a double
cylinder cover may be used in lieu of
single covers.
4. Attach the second 24" hose to the tee
check valve on the regulator and the right
handed swivel nut to the cylinder valve.
Located in a recessed compartment or
housing:
Fig 6.7 Two propane cylinders
1. Connect the 3/8” low-pressure hose to the
outlet of the two-stage regulator.
2. Place the cylinder on the bracket in the
recess compartment or housing and
secure them so the outlets of the cylinder
valves are facing the “sidewalls” of the
compartment or housing (opposite of each
other).
3. Mount the regulator on the center back
wall of the compartment or housing so the
vent is pointed downward.
Attach the 1/4” inverted flare x 18” Type-1
pigtail hose to the regulator inlet and the right
hand swivel nut to the cylinder valve
Main Supply Hose – Low Pressure
Attach the main supply hose from the
regulator to the brass manifold fitting in the
frame of the trailer. The swivel brass nut on
the main hose will be your final attachment.
Several things to remember each time the
propane container is removed:
Fig. 6.7 Main supply hose
6 - 5