SECTION 9
SLIDEOUT SYSTEM
TOWABLE
T
ROUBLESHOOTING
T
HE
S
LIDEOUT
If the slideout does not move when the
slideout switch is depressed, follow these
steps.
Check the auxiliary battery (customer
supplied) for a full charge and good wire
connections.
Check the 12-volt fuse or circuit breaker.
Check for loose connections at the
slideout motor.
If the slideout still will not operate, follow
these steps.
If the slideout is extended, refer to the
following section on overriding the specific
slideout system installed on your RV.
If the slideout is retracted, leave it in that
position.
Contact your dealer or customer service
for repair assistance.
If the slideout extends crooked or only one
side moves, follow these steps.
Follow steps on overriding the specific
slideout system installed on your RV.
You may need to push the side that is not
sliding to get it to retract all the way.
Contact your dealer or customer service
for repair assistance.
.
Lippert slideout System (flush floor)
.
For optimum performance, the slide-out
system requires full battery current and
voltage. Although the system is designed to
be almost maintenance free, actuate the room
once or twice a month to keep the seals and
internal moving parts lubricated. Check for
any visible signs of external damage after and
before movement of the travel trailer.
NOTE:
For long-term storage: It is
recommend the room be closed (retracted).
MANUAL OPERATION
The Lippert Electric slide comes with a
manual over ride system. Locate the crank
extension with pin outside of the chassis main
rail as, Fig. 8.3, shows underneath the unit on
the end of the motor (If your crank extension
is under the inside of the frame, please refer
to Fig. 8.5 and 8.6).
This is where the crank handle (standard fifth
wheel landing gear crank handle or 3/4”
socket and ratchet fits on to allow the manual
extension/retraction of the room, Fig. 8.5 and
8.6. Simply take the crank handle (through-
frame models) or wrench, ratchet or drill with
a nut driver (in-frame models) and rotate it
clockwise to retract and counterclockwise to
extend slide-out.
It is important to note that you DO NOT need
to attempt to disengage the motor as the
actuator is “manual ready” Just hook up and
crank.
Use EXTREME CAUTION when extending
and/or retracting room using the manual
override feature. It is possible to operate the
slideout beyond the maximum extension
and/or retraction and damage the slide
components, slide room structure or trim
components.
The gears can be stripped out if the
room is manually retracted/extended to
it’s fullest extent and the operator
continues to rotate manual override.
Any damage due to misuse of the
Manual Override feature will disqualify
any and all claims to the Limited
Warranty.
MANUAL OPERATION - THROUGH FRAME
Always disconnect battery from system
prior to manually operating system.
Failure to disconnect battery can cause
electricity to backfeed through the
motor and cause serious damage to the
system as well as void the warranty.
Fig 8.3 Through Frame Crank Extension w/ pin
9 - 2
Содержание Travel Star
