3-4
Using the StarBoard
English
StarBoard PX-DUO-50P/65P
3.2 How to Use Touch Mode
This section gives a basic description of how to use the board in touch mode.
3.2.1 Character Input
To input characters, use your finger or the stylus that was provided with the product.
- Using the stylus pen and electronic pen.
Use the stylus pen on the board with your body kept sufficiently away, so that your palm
and elbow do not touch the board. If your hand or elbow touches the board, or you are
within 1 cm of the board, it might cause an incorrect operation.
NOTICE
Use an input tool with a thickness of least 7 mm.
When inputting to this product, use a tool that is at least 7 mm. If a pen
or similar tool with a thickness of less than 7 mm is used, the input will
be unstable.
Also, do not use tools with a sharp tip, such as a ballpoint pen. If such a
tool is used incorrectly, it could damage the surface of the board.
Содержание PX-DUO-50P
Страница 14: ...StarBoard PX DUO 50P 65P English...
Страница 24: ...StarBoard PX DUO 50P 65P English...
Страница 42: ...StarBoard PX DUO 50P 65P English...