4-2
Appendix
StarBoard PX-DUO-50P/65P
English
Recognition-Related Problems
Problem
What to check
What to do
Is the USB cable connected to
the PC?
Connect the USB cable to the PC.
When viewing the central
region of the digitiser (page
1-5) from the bottom, is the
LED lit green?
Check the USB cable connection.
Did you start the system in
the correct sequence?
Start the system in the correct sequence. (For
details on starting the system, see page 3-1 of
this User's Guide.)
StarBoard Software files may
be broken or installation may
not be complete correctly.
Uninstall the StarBoard Software and then
re-install it.
(
For details on installing StarBoard Software,
see the StarBoard Software x.x User's Guide.)
The StarBoard
does not recognise
input.
Other than the above
Contact a support centre.
Is something blocking light
from reaching the board
surface or reflective tape?
Remove the blockage.
Is the reflective tape dirty?
Wipe away any soiling on the reflective tape.
The following
Touch Sensor
Error appears.
Other than the above
Adjust the sensor.
(See page 4-4 of this User's Guide.)
The following
Touch Sensor
Error appears.
The controller must be reset
and the system restarted.
Disconnect the USB cable and reconnect it. If
this does not solve the problem, restart the PC.
The following
Touch Sensor
Error appears.
Is a high-speed USB device
connected to the USB host
controller used to connect the
StarBoard?
Be sure to connect the StarBoard and any
high-speed USB devices to separate USB host
controllers.
Be sure to use a USB hub in the case of PCs
with only one USB host controller.
Содержание PX-DUO-50P
Страница 14: ...StarBoard PX DUO 50P 65P English...
Страница 24: ...StarBoard PX DUO 50P 65P English...
Страница 42: ...StarBoard PX DUO 50P 65P English...