3-2
Using the StarBoard
English
StarBoard PX-DUO-50P/65P
If the "No connection" icon in below appears on the Tasktray, it means that the StarBoard is
not connected. Make sure that the StarBoard and the PC are properly connected.
Connected No
Connection
If the StarBoard is properly connected, the icon changes to "Connected" as above. If the icon
does not change despite correcting the connection, there may be some other problem. For
details, refer to "4. Appendix 4.1 Troubleshooting" on page 4-2 of this User's Guide.
If the cursor location deviates from the pen tip, perform calibration. In the StarBoard
Software Main Menu, select "Settings"
→
"Calibration"
→
"OK". (Or "StarBoard"
→
"Settings"
→
"StarBoard"
→
"Calibration", when using Toolbar Mode.)
3.1.2 Shutting Down the StarBoard
(1) Quit the StarBoard Software.
(2) Quit Windows.
(3) Turn off the PC connected to the StarBoard.
(4) Press the power button at the lower left corner of the Digitiser to turn off the plasma display.
Check that the POWER LED goes off.
Содержание PX-DUO-50P
Страница 14: ...StarBoard PX DUO 50P 65P English...
Страница 24: ...StarBoard PX DUO 50P 65P English...
Страница 42: ...StarBoard PX DUO 50P 65P English...