26
Bits0-1 :
Reserved
Bit2 :
Reserved (always 0)
Bits3-4 :
Pulse dialing make/break ratio (&Pn)
0 = 39%-61% ratio at 10 pulses per second (&P0) (Default)
1 = 33%-67% ratio at 10 pulses per second (&P1)
2 = 39%-61% ratio at 20 pulses per second (&P2)
3 = 33%-67% ratio at 20 pulses per second (&P3)
Bit5 :
Reserved
Bits6-7 :
MNP Link Negotiation Speed (*Hn)
0 = Link negotiation at highest speed (*H0) (Default)
1 = Link negotiation at 1200 bps (*H1)
2 = Link negotiation at 4800 bps (*H2)
S29 - Flash Dial Modifier Time
Sets the length of time, in units of 10ms, that the modem will go on-hook when it encounters the flash (!) dial
modifier in the dial string.
Range:
0-255 10 ms intervals
Default:
0(disabled)
S30 - Disconnect Inactivity Timer
Sets the length of time in tens of seconds, that the modem will stay on line before disconnecting when no data
is sent or received.
Range:
0-255 tens of seconds (0-2550 seconds)
Default:
0 (disabled)
S31 - Bit Mapped Options Status
Default:
2
Bit0 :
Reserved
Bit1 :
Controls auto line speed detection (Nn)
0 = Disabled (N0)
1 = Enabled (N1) (Default)
Bits2-3 :
Controls error correction progress messages (Wn)
0 = DTE speed only (W0) (Default)
1 = Full reporting (W1)
2 = DCE speed only (W2)
Bits4-7 :
Reserved
S32 - XON Character
Set the value of the XON character.
Range:
0-255, decimal
Default:
17 (XON)
S33 - XOFF Character
Sets the value of the XOFF character.
Range:
0-255, decimal
Default:
19 (XOFF)
