19
LO W R I S E R 2 . 0 - L I F T F U N C T I O N S
Entering & exiting the lift
The lift can be configured to allow a user to enter and exit the lift without the need to
reposition the wheelchair or other mobility device. They simply enter the lift, and exit in the
same direction. A robust handle is provided so that the user can pull them self into the lift
car.
Closing the gate
Automatically operated gates will close after a short time has elapsed. To re-open the
gates, if necessary, the user presses the call button for the floor where they currently are.
On manually operated gates they simply ensure that the gate latches are shut.
Travelling to the required level
Once the gates have closed, the lift will now be permitted to travel to the required level.
You will note that the controls operate only by a ‘constant pressure’, i
.e. as soon as you
remove your finger from any directional button the lift will stop.
This is to allow the user to
change his/her mind and alter the direction of intended travel.
Changing direction of travel
If a user wishes to return to the level they departed from (mid travel), they simply remove
their finger from the in-car directional control button, wait 3 seconds and then select the
new direction of travel button. The lift will then move in the new direction. Alternatively the
original direction of travel can be maintained if desired.
Note: after releasing any control button there is a 3 second delay before allowing the user
to operate any other function.
