12
This page has been left blank intentionally
LO W R I S E R - S A F E T Y F E AT U R E S
Safety features – safety edge
The platform has a safety edge around the periphery of
the platform. This will stop the lift if it comes into contact
with an obstruction.
If this safety edge is activated, the lift will stop. In this
eventuality, press the up direction side of the rocker
switch/up button, clear the obstruction and continue the
descent.
Safety features – ramp sensing
If there is an obstruction beneath the ramp when it
deploys, the ramp will stop.
Press and hold the up direction side of the rocker switch/
up button to raise the ramp and allow the obstruction to
be cleared.
The ramp can now be lowered by pressing the down
direction side of the rocker switch/down button. It will
stop automatically when it touches the ground floor.
If there is an obstruction on top of the ramp when it
raises, the ramp will stop.
Press the down direction side of the rocker switch/down
button to lower the ramp and allow the obstruction to be
cleared.
The ramp can now be raised by pressing and holding
the up direction side of the rocker switch/up button. The
ramp will automatically stop when fully raised and the lift
will go up.