Stanley SDR1400, Оригинальное руководство пользователя

Страница: 6 / 46

ENGLISH
(Original instructions)
6
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
ADDITIONAL SPECIFIC SAFETY RULES
Safety instructions for mud mixers
• Never clamp the product into a vice or to a work bench to
use as a stationary tool. This may cause serious injury.
• Switch the product off immediately if the tool attachment
jams. Be prepared for high reaction torques, which could
cause kickbacks. The tool attachment will jam if the
product is overloaded or becomes twisted in the
workpiece.
• Wear protective clothing, dust masks and protective
gloves when using this product. While this product is being
used, dust may be created or splashing may occur
• Always operate the product with both hands on the
handles. Keep a firm grip on the handles and ensure you
footing is secure on a stable, level and dry ground. Loss of
control over the product can cause personal injury.
• Do not use this product to process substance which is
highly flammable or potentially explosive such as solvents.
Using this product will create sparks which can ignite
vapours.
• Use this product indoors only. Moisture and rain can
damage the product or can lead to electrocution from the
power supply, if stirred material penetrates into the inside
of the product or if the product falls into the material being
stirred. Have the product inspected by a professional
electrician. Stirred material and moisture can damage the
product or lead to electrocution, if they penetrate inside the
product.
• Do not work with any substances which are harmful to
health. Many materials are noxious when they are
processed.
• Do not breathe in any unhealthy substances and avoid
contact with your skin. Follow the manufacturers’
instructions and wear suitable personal protective
equipment.
• Wait until the product has come to a complete standstill,
before removing it from the material being stirred and
putting it down. The bucket can get jammed or stirred
material can be flung around. This can lead to a loss of
control over the product.
SAFETY OF OTHERS
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
RESIDUAL RISKS
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
• Injuries caused by touching any rotating/moving parts.
• Impairment of hearing.
• Risk of injury when changing any parts, or accessories.
• Health hazards caused by breathing dust developed when
sawing wood, especially oak, beech and MDF.
• Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
Cable cross-sectional
area (mm 2 )
Cable cross-sectional
area (mm 2 )
0.75 6
1.00 10
1.50 15
2.50 20
4.00 25
Cable length (m)
7.5 15 25 30 45 60
220-240 0 - 2.0 6 6 6 6 6 6
2.1 - 3.4 6 6 6 6 6 6
3.5 - 5.0 6 6 6 6 10 15
5.1 - 7.0 10 10 10 10 15 15
7.1 - 12.0 15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25 -
Voltage Amperes Cable rated current (Ampere)
110-127 0 - 2.0 6 6 6 6 6 10
2.1 - 3.4 6 6 6 6 15 15
3.5 - 5.0 6 6 10 15 20 20
5.1 - 7.0 10 10 15 20 20 25
7.1 - 12.0 15 15 20 25 25 -
12.1 - 20.0 20 20 25 - - -
ELECTRICAL SAFETY
Your tool is double insulated; therefore no earth wire
is required. Always check that the main voltage
corresponds to the voltage on the rating plate.
WARNING
!
If the power cord is damaged, it must be
replaced by the manufacturer, authorized STANLEY
Service Center or an equally qualified person in
order to avoid damage or injury. If the power cord is
replaced by an equally qualified person, but not
authorized by STANLEY, the warranty will not be
valid.
USING AN EXTENSION CABLE
If it is necessary to use an extension cable, please use an
approved extension cable that fits the tool’s power input
specifications. The minimum cross-sectional area of the
conducting wire is 1.5 sq. mm. Cables should be untangled
before reeling up.