Standard AccuBindPro2, Руководство оператора

Страница: 20 / 32

Standard Duplicating Machines Corporation AccuBind
Pro
2
Revision 12/17/08 20
12
18, 19
14
12.
Insert the Binding Strip into the feeder with the adhesive side facing
upwards.
13. The binding cycle is started automatically.
14. LED BINDING COMPLETED lights up, the clamping station opens and moves after removal of
the book into the position of the previous book size plus 0.59” (15 mm) opening clearance.
15. If the binding isn't removed quickly, you'll hear an audible warning signal.
16. Remove the binding straight up and place onto the cooling rack to cool down.
17. Place the pressure block against the binding and press firmly against it.
18. If you want to continue your binding job with paper of the same or a smaller size you may do so
by putting the paper stack into the binding device and triggering the binding process with the
START button.
19. If your paper stack is bigger than the one used before you have to open the clamping jaws by
pressing the START button. Then put the paper stack into the AccuBind
Pro
2 and trigger the
binding process by pressing the START button once again.
16, 17
Note
Allow the bound material to rest for approx. 10 minutes until it has cooled down.