page 8
Owner’s Manual
GX2355S
A/B Key
Immediately recalls two user assigned channels from any channel.
CALL/SET Key
The
CALL/SET
key functions as the enter key.
Secondary use
Press the
CALL/SET
key to access the DSC OPERATION menu. The
following DSC functions can be accessed from the DSC OPERATION
menu; INDIVIDUAL, GROUP, ALL SHIPS, TELEPHONE, STANDBY,
CALL WAIT, POS REQUEST and POS SEND.
Press and hold the
CALL/SET
key to access the SETUP menu. The
following functions can be accessed in the SETUP menu; LAMP ADJUST,
CONTRAST, CH NAME, INDIV DIR, TELEPHONE MEMORY ID, POS
REPLY, SCRAMBLER, KEY BEEP, INDIV RING, TIME SET, USER
MMSI, GROUP MMSI, DSC SCAN.
H/L Key
Toggles between high and low power. When the
H/L
key is pressed
while the transceiver is on channel 13 or 67, the power will temporarily
switch from LO to HI power until the
PTT
is released. The
H/L
key does
not function on transmit inhibited and low power only channels.
NAV / IC Key
1. Pressing this key, when connected to the GPS receiver, the LCD
displays position data, Date, Time, SOG (Speed Over Ground) and
COG (Course Over Ground) from the GPS.
2. Press and hold down this key, when the optional RAM Mic is
connected. Intercom operation will operate between radio and RAM
Mic.
r
CHANNEL SELECTOR KNOB
Rotary knob used to select channels and, to choose the item selection
of different functions (DSC operation, PA/FOG operation and etc.). The
CH key on the microphone can also be used to select them.
Secondary Use
While holding down the
SCAN
Key and turning the
Channel Selector
knob, you can confirm memory channels for scanning.
t
RAM MIC CONNECTOR
Connects the Remote Access Microphone (RAM MIC). Refer to
“section 8.0, (RAM MIC OPERATION).
