GX2355S
Owner’s Manual
page 7
WX Key
Immediately recalls the previously selected NOAA weather channel
from any channel location.
Secondary use
1. Holding down the
16/9
key while pressing the
WX
key changes the
mode from USA to International or Canadian.
NOTE
If position is displayed, this icon will be hidden.
2. Holding down the
WX
and
SCAN
key while turning the power on resets
the microprocessor and erases scan channels from memory. This clears
the memory and establishes the factory-set defaults. For a list of these
defaults, see the section on Resetting the Transceiver’s Microprocessor.
SCAN Key
1. Starts and stops scanning of programmed channels.
2. If held while the
UP
or
DOWN
keys on the mic case are pressed or
Channel Selector
knob on radio is turned, the radio will show the
channels in scan memory. This function will not work if the unit is scanning.
NOTE
There is only one priority channel. However, it can be assigned to a
channel other than WX and CH70. The priority channel is marked with
P-CH on the LCD.
MEM Key
Memorizes the selected channel into the transceivers scan memory for
scanning. When pressed again, it DELETES the channel from the scan
memory.
Secondary use
The MEM key is also used to select a priority channel.
1. Select the desired channel.
2. Press and hold the MEM key until the display shows P-CH.
NOTE
If position is displayed, this icon will be hidden.
DISTRESS Key
To send the distress call see section 6.2, (Sending a Distress Call).
PA/FOG key
Available to operate the PA function or the FOG HORN function
