page 32
Owner’s Manual
GX2355S
6. Turn the
Channel Selector
knob to select the
name.
7. Press the
CALL/SET
key to display the logged
call.
8. Press the
CALL/SET
key to resend the INDIVIDUAL CALL.
9. To exit from Individual Call Waiting, select EXIT and press the
CALL/SET
key.
10. Turn the
Channel Selector
knob to select another logged call or to
select EXIT.
11. Press the
CALL/SET
key to access next logged call or EXIT.
6.10 POSITION REQUEST
The position request mode may be used to show the position of another
vessel that has a DSC radio with this feature. The other vessel must have
an operating GPS receiver connected to its DSC transceiver and must not
have its transceiver set to deny position requests. (Refer the section 7.5 to
enter information into the individual directory)
1. Select a traffic channel, then press the
CALL/
SET
key. Then the DSC CALLING menu will
appear in the display.
2. Turn the
Channel Selector
knob or press the
UP/DOWN
keys on the microphone to select the
POS REQUEST.
3. Press
CALL/SET
key to show the Position
request directory. This directory uses the
INDIVIDUAL Directory information.
4. Turn the
Channel Selector
knob or press the
UP/
DOWN
keys on the microphone to select a name.
5. Press the
CALL/SET
key to transmit the
position request DSC call.
JUN15 8:45P
ID987654321
A
EXIT
>SEND
>NAME1
NAME2
NAME3
NAME4
A
>TOM
MIKE
BOB
DICK
A
TELEPHONE
STANDBY
CALL WAIT
>POS REQUEST
A
TOM
MIKE
>BOB
DICK
A
TX HI USA
BOB
>INDIVIDUAL
GROUP
ALL SHIPS
TELEPHONE
A
