GX2355S
Owner’s Manual
page 17
BUSY HI USA
T/W CH16
VTS
A
3. The scanning will be performed while receiving
the MEM CH (memorized channel).
4. To stop scanning, press the
SCAN
,
16/9
,
WX
, or
PTT
key.
NOTE
Triple watch (T/W) means the radio is watching CH70 for DSC Calls.
Dual watch (D/W) means the radio is not watching CH70 for DSC Calls.
5.10 CHANNEL A /B INSTANT CALL
Two calling channels (used by an organization or a favorite channel)
can be preset. But USA channels 9 and 16, and WX channels should
not be assigned as A or B channels because they are readily available
with the
16/9
and
WX
keys. If the
A/B
key is pressed and no channel A
or B has been assigned, the alert signal will be present.
5.10.1 Storing new channel A/B
1. Press and hold down the
A/B
key and rotate the
Channel Selector
knob to select the desired channel.
2. Release the
A/B
key to store a desired channel as channel A/B.
3. Repeat steps to program second channel A/B.
5.10.2 Changing the stored channel A/B
1. Press the
A/B
key for memorized channel to appear.
2. Press and hold down the
A/B
key and rotate the
Channel Selector
knob to select the desired channel.
3. Release the
A/B
key to store a desired channel as channel A/B.
NOTE
The stored channels will delete in microprocessor resetting mode only.
5.10.3 Operating the channel A/B
Pressing the
A/B
key more than once toggles between channel A,
channel B and the channel that was received on.
5.11. PA/FOG OPERATION
PA HAIL mode:
PA HAIL mode allows the transceiver to be used as a power hailer when an
optional 4 ohm hailer speaker is installed. The Hail mode has a listen-back
feature which provides two way communication through the hailer speaker.
