GX2355S
Owner’s Manual
page 45
7.12 USER MMSI INPUT
1. Press and hold the
CALL/SET
key until the SETUP menu is
displayed.
2. Select the USER MMSI in the SETUP menu
with the
Channel Selector
knob.
3. Press the
CALL/SET
key.
The USER MMSI menu will appear, and the first
space will blink.
4. Turn the
Channel Selector
knob to set the
number (0 to 9 ).
5. Press the
CALL/SET
key to store the set
number.
The blinking number is stored, and the next
space will blink. To delete previous letter, press
the
H/L
key.
6. Repeat steps 3 and 4 to set your MMSI.
7. When the last number of your MMSI is in place, press the
CALL/
SET
key to store your MMSI.
NOTE
User MMSI can be input only twice. If the user tries to
input MMSI more than twice, the radio will show the
display on the right. If the user needs to change the
MMSI more than twice, the transceiver will have to be
sent to Factory Service. Refer to the section 10.2
FACTORY SERVICE.
KEY BEEP
INDIV RING
TIME SET
>USER MMSI
A
USER MMSI
A
– – – – – – – –
USER MMSI
A
0 – – – – – – –
USER MMSI
A
0 – – – – – – –
USER MMSI
A
012345678
ERROR TOO
PRESS
CALL/SET KEY
A
MANY ENTRIES
