GX2355S
Owner’s Manual
page 49
A/B Key
Immediately recalls two user assigned channels from any channel.
IC Key
Activates the intercom mode between the RAM Mic and the transceiver.
Refer to section 8.3, INTERCOM OPERATION.
WX Key
Immediately recalls a weather channel from any channel location. Recalls
the previous channel when the
WX
key is pressed again.
Secondary use
When holding down the
16/9
key while pressing the
WX
key, the mode
toggles between USA, International and Canadian.
SCAN Key
1. Starts and stops scanning of programmed channels.
2. If held while the UP or DOWN key is pressed, the radio will show the
channels in scan memory. This function will not work if the unit is scanning.
Secondary use
Press the
MEM
key to add the selected channel to the transceiver’s scan
memory, MEM will appear on the LCD to indicate that the channel has
been entered into scan memory. To delete the channel from scan memory,
press the
MEM
key until the MEM disappears from the LCD.
NOTE
If the transceiver is in the M-SCAN mode, then the RAM Mic is in SC
mode. If the transceiver is in P-SCAN mode, then the RAM Mic is in
PS mode.
SQL
VOL
PWR
16/9
WX
A/B
SCAN
IC
H/L
MIC
LAMP
LAMP
CALL
CALL
Figure 5. CMP23 RAM Mic
