Standard Horizon HX210 Скачать руководство пользователя страница 11

Страница: 11 / 52

Page 9

HX210

5. GETTING STARTED

5.1 RADIO CARE

After using the

HX210

in salt water environment is recommended to clean

the radio with fresh by rinsing the radio under a sink faucet or by dunking the

radio in a bucket of fresh water. After washing, use a soft cloth and thorough-

ly dry all parts of the radio. This is to keep the rubber switches and speaker

grill clean and in top operating condition.

5.2 BATTERIES AND CHARGERS

If the radio has never been used, or its charge is depleted, it may be charged

by connecting the

SBH-25

Charger Cradle with the

SAD-23B

AC Adapter,

see section “

5.2.2 BATTERY CHARGING

”. If 12V DC power is available, the

supplied

E-DC-19A

DC Cable with 12 V Cigarette Lighter Plug may be used

for charging the battery. The

SAD-23B

and

E-DC-19A

will charge a com-

pletely discharged built-in battery in approximately 3 hours.

CAUTION

To avoid risk of explosion and injury, the built-in battery pack should only be

charged or recharged in non-hazardous environments.

5.2.1 BATTERY SAFETY

The built-in battery of this transceiver contains Li-ion batteries. This type

of battery stores a charge powerful enough to be dangerous if misused or

abused, especially when removed from the transceiver. Please observe the

following precautions:

DO NOT SHORT BATTERY PACK TERMINALS

: Shorting the terminals

that power the transceiver can cause sparks, severe overheating, burns, and

battery cell damage. If the short is of sufficient duration, it is possible to melt

battery components. Do not place a loose battery pack on or near metal sur-

faces or objects such as paper clips, keys, tools, etc. When the battery pack

is installed on the transceiver, the terminals that transfer current to the trans-

ceiver are not exposed. The terminals that are exposed on the battery pack

when it is mounted on the transceiver are charging terminals only and do not

constitute a hazard.

DO NOT INCINERATE

: Do not dispose of any battery in a fire or incinerator.

The heat of fire may cause battery cells to explode and/or release danger

ous gases.
Battery Maintenance

For safe and proper battery use, please observe the following:



The built-in battery should be charged only in non-hazardous environ-

ments.

Содержание HX210





















































Результаты поиска

Содержание HX210

Отзывы:

Похожие инструкции для HX210

Бренды по названию

Популярные бренды

Standard Horizon HX210, Руководство пользователя

Результаты поиска

Содержание HX210

Отзывы:

Похожие инструкции для HX210

Бренды по названию

Популярные бренды