Standard Horizon HX210 Скачать руководство пользователя страница 18

Страница: 18 / 52

HX210

Page 16

7. BASIC OPERATION

7.1 PROHIBITED COMMUNICATIONS

The FCC prohibits the following communications:



False distress or emergency messages.



Messages to “any boat” except in emergencies and radio tests.



Messages to or from a vessel on land.



Transmission while on land.



Obscene, indecent, or profane language (potential fine of $10,000).

7.2 INITIAL SETUP

1. To install the antenna onto the transceiver; hold the bottom end of the

antenna, then screw it onto the mating connector on the transceiver until

it is snug. Do not over-tighten.

7.3 RECEPTION

1. Press and hold the

POWER

key for one second to turn the radio “ON”.

2. Press and hold the [

SQL

] switch until the

“

” indicator appears on the display.

This is the “squelch off” state.

3. Press the [

VOL-

]/[

VOL+

] key until noise or audio from the speaker is

heard at a comfortable level.

4. Press the [

SQL

] switch to resume normal (quiet) monitoring.

5. Press the [

] or [

] key to select the desired channel. Refer to the chan-

nel chart on page 40 for available channels.

6. When a signal is received, adjust the volume to the desired listening

level. The “

” indicator on the LCD is displayed indicating that the

channel is being used or the radio is not squelched.

7.4 TRANSMISSION

1. Setup the transceiver as described in the “

7.3 RECEPTION

” discussion above.

2. Before transmitting, monitor the channel and make sure it is clear.

THIS IS AN FCC REQUIREMENT!

3. Press the

PTT

(Push-To-Talk) switch to

transmit. During transmission, the “

” in-

dicator will appear on the display.

4. Position the microphone about 1/2 to 1 inch (1.2 ~ 2.5 cm) away from

your mouth. Speak slowly and clearly into the microphone.

5. When the transmission is finished, release the

PTT

switch.

Содержание HX210





















































Результаты поиска

Содержание HX210

Отзывы:

Похожие инструкции для HX210

Бренды по названию

Популярные бренды

Standard Horizon HX210, Руководство пользователя

Результаты поиска

Содержание HX210

Отзывы:

Похожие инструкции для HX210

Бренды по названию

Популярные бренды