Standard Horizon HX210 Скачать руководство пользователя страница 19

Страница: 19 / 52

Page 17

HX210

7.4.1 TRANSMIT POWER

The TX output power of the

HX210

is set to high level (6 W*) in factory de-

fault, and the “

” indicator is displayed on the top part of the screen.

To change the TX output power:

1. Press one of the soft keys.

2. Press the [◄]/[►] key repeatedly, until [

[

], or [

] is displayed above a soft key

at the bottom of the LCD.

3. Press the [

], [

], or [

] soft key to

switch between HI (6 W), MD (2.5 W), or LO

(1 W) output power.

7.4.2 TRANSMIT TIME - OUT TIMER

(

TOT

)

While the

PTT

switch is held down, transmission time is limited to 5 minutes.

This prevents prolonged (unintentional) transmissions. About 10 seconds

before automatic transmitter shutdown, a warning beep will sound from the

speaker. The transceiver automatically switches to receive mode, even if the

PTT

switch continues to be held down. Before transmitting again, the

PTT

switch must first be released, then wait 10 seconds and then pressed again.

This Time-Out-Timer (TOT) prevents a continuous transmission that would

result from an accidentally stuck

PTT

switch.

WATER ENABLED LIGHT

When the

HX210

comes in contact with water a white light will blink to

assist retrieving it in low light conditions. The light will automatically turn

off in about 15 seconds when it is removed from water.
The

HX210

has a menu selection to enable and disable. Refer to SETUP

Mode Item “STROBE LED (Water Hazard)” on page 33 for details.

7.5 USA, CANADIAN, AND INTERNATIONAL CHANNELS

To change the channel group from USA to International or Canada:

1. Press and hold the [

MENU/SET

] key.

2. Press the [▲]/[▼] key to select “

CHANNEL SETUP

”.

3. Press the [

SELECT

] soft key.

4. Press the [▲]/[▼] key to select “

CHANNEL GROUP

”.

5. Press the [

SELECT

] soft key.

6. Press the [▲]/[▼] key to select the desired

channel group “USA”, “INTERNATIONAL”,

or “CANADA”.

7. Press the [

ENTER

] soft key to store the se-

lected setting.

8. Press the [

CLR

] key to return to radio operation.

Содержание HX210





















































Результаты поиска

Содержание HX210

Отзывы:

Похожие инструкции для HX210

Бренды по названию

Популярные бренды

Standard Horizon HX210, Руководство пользователя

Результаты поиска

Содержание HX210

Отзывы:

Похожие инструкции для HX210

Бренды по названию

Популярные бренды