Page 33
HX210
Water Hazard
1. Press and hold the [
MENU/SET
] key.
2. Press the [▲]/[▼] key to select “
CONFIG
”, then press the [
SELECT
] soft
key.
3. Select “
STROBE LED
” with the [▲]/[▼] key, then press the [
SELECT
]
soft key.
4. Select “
WATER HAZARD
” with the [▲]/[▼] key, then press the [
SELECT
]
soft key.
5. Press the [▲]/[▼] key to select the desired
setting. You can select one from “OFF”, “ON”,
or “ON/PWR ON”.
OFF
:
The LED does not light up.
ON
:
The LED lights up.
ON/PWR ON
: The LED lights up and the
transceiver turns on even if
the transceiver is OFF.
6. Press the [
ENTER
] soft key to store the selected level.
7. Press the [
CLR
/
] key to return to radio operation.
KEY SETUP
The function assigned to the function screen Soft Keys can be changed (see
page 27 “
7.12 Soft Keys
”).
BACKLIT LEVEL
The backlight brightness may be adjusted in 5 levels.
1. Press and hold the [
MENU/SET
] key.
2. Press the [▲]/[▼] key to select “
CONFIG
”, then press the [
SELECT
] soft
key.
3. Select “
BACKLIT TIMER
” with the [▲]/[▼] key, then press the [
SELECT
]
soft key.
4. Press the [▲]/[▼] key to select the desired
setting, from “1” to “5”, or “OFF”.
5. Press the [
ENTER
] soft key to store the se-
lected level.
6. Press the [
CLR
/
] key to return to radio operation.