HX210
Page 28
8. MENU (“SETUP”)
The HX210’s Menu Mode allows enables a number of the HX210 operating
parameters to be custom-configured.
Use the following procedure to activate and set The Menu Mode parameters:
1. Press and hold the [
MENU/SET
] key.
2. Press the [▲]/[▼] key to select the desired menu item, then press the
[
SELECT
] soft key.
3. Press the [▲]/[▼] key to select the desired menu item, then press the
[
SELECT
] soft key.
4. Press the [▲]/[▼] key to select the desired setting.
5. Press the [
ENTER
] soft key to store the selected setting.
6. Press the [
CLR
/
] key to return to radio operation.
CHANNEL SETUP
CHANNEL GROUP
This menu item enables setting the channel group from USA channels, to
Canada channels, or International channels.
Refer to section “
7.5 USA, CANADIAN, AND INTERNATIONAL CHANNELS
” for details.
WEATHER ALERT
Enables/disables the NOAA Weather Alert function. The default setting is “OFF”.
1. Press and hold the [
MENU/SET
] key.
2. Press the [▲]/[▼] key to select “
CHANNEL SETUP
”, then press the [
SE-
LECT
] soft key.
3. Select “
WEATHER ALERT
” with the [▲]/[▼] key, then press the [
SELECT
]
soft key.
4. Press the [▲]/[▼] key to select “ON” or
“OFF”.
5. Press the [
ENTER
] soft key to store the new
setting.
6. Press the [
CLR
/
] key to return to radio operation.
SCAN MEMORY
Before scanning may begin, the desired scan channels must be pro-
grammed. This selection allows channels to be stored to the scan memory.
Refer to section “
7.9.1 PROGRAMMING SCAN MEMORY
” for details.
SCAN TYPE
This selection is used to change the scan mode between “M-SCAN” (Memory
Scan) and “P-SCAN” (Priority Scan). The default setting is “P-SCAN”.
Refer to section “
7.9.2 SELECTING SCAN TYPE
” for details.
