34
5.4.5.5
Network Mask
Network Mask
0
Enter a unique 5 digit number so that your codes will be different then other nearby encrypted codes.
This does not have anything to do with an ethernet network. It is very important that this matches the
setting in the sales terminal (satellite).
5.4.5.6
The time the wash code is valid
valid for xx days
The more digits you use for your code the longer the codes can be valid before they are duplicated.
Number of Digits
Valid days
Customer Days
5
34
14
6
119
60
Number of Digits – entered above.
Valid Days – The maximum number of days that you can choose until a code can be issued again. Do
not exceed this amount.
Customer Days – The number of days you should tell your customers that they have to use the code.
5.4.5.7
Limiting the number of codes that can be validated
max window
0
This is a GXP only setting. It limits the number of codes that can be validated. This is in case
somebody is guessing your codes. If left at zero then there is no limit.
5.4.5.8
When to clear the encrypted database
Clear the encrypted database?
If you make any changes to the Number of Digits, Max Satellites, Max Progs, Max Codes, Network
Mask or Valid Days you should clear the database. The issued codes are based on these entries.
Changes should only be made under the right conditions. Clearing the database starts the codes all
over. Previously issued codes may or may not work.
5.4.5.9
Automatically entering a code number
auto enter after
6 digits
The number of digits that can be entered before a code will automatically entered. This can be
convenient for you customer so they do not have to press the enter key. You need to make sure this is
large enough for any codes, PIN numbers or external access codes.
