4
Introduction
Thank you for purchasing our Invader 2420. Enjoy your new equipment and make sure to read this manual
carefully before operation!
1. Features
2 x DMX Outputs
X
484 DMX Channels in total, including 481Ch. for DMX fog, 482Ch. for future use, 483-484Ch. for DMX
X
strobe
Fixture Library ( for built-in ACME lighting fixtures; Other brand fixtures can be set manually but
X
Max. with 50 fixtures
Built-in 10 MOVEMENTS - Can adjust PAN/TILT Position PAN/TILT Range Fade time or Wait time
X
LOOP
60 Programmable Chases, each chase can have 200 scenes max
X
1200 Programmable Scenes (60 banks x 20 scenes)
X
400 Programmable Presets (20 presets, each preset has 10 colours and 10 gobos)
X
Control 20 DMX light fixtures, and each fixture up to 24 Channels
X
Operate 20 Fixture groups simultaneously
X
24 faders for controlling 24 DMX channels
X
60 x CUEs (Combined many chases together and operate the chases at the same tine)
X
20 x override – Can assign one (or more than one) of the fixtures to perform special function, like
X
follow spot, during the operation. 20 overrides can be set in the controller
20 x Centre - Can set each fixture’s central position of the movement; you can set up to 20 centre
X
positions
Remote DMX Addressing only for ACME lights
X
Blackout mode - 1. Standby 2. PAN/TILT Centre Position 3.Blackout Scene
X
Can use jog wheel to adjust the audio sensitivity (LCD display will indicate the value)
X
Can set Password to boot the controller
X
Lock/Unlock memory/Need password to clear all memory
X
Standard MIDI facility
X
Lighting Library and software downloaded available
X
DMX fog machine control 481 Ch.
X
Both DMX (483 & 484) and analog strobe control available (Via LCD display, people can adjust the
X
speed of analog strobe)
2 remote Easy Controller ( CA-8 )
X
Gooseneck USB LAMP
X
NOTE:
Some basic knowledge of MIDI and DMX is required to fully utilize this unit.