40
5. After 3 seconds, use jog wheel #2 to select the fixtures of the first group, and jog
wheel #4 to select the fixtures of the second group. When you turn the jog wheel #2
or #4, the cursor will switch between the first and second group. The fixtures of this
two group will be selected in turn, and the unit will act differently when it be selected.
6. Press number Button 1-20, all the LEDs will blink for 3 times, the address of the
corresponding fixture will show on the LCD display, it means the fixture’s amount of
the channel is as same as the corresponding number button’s.
7. Repeat 5-6 to set the address of other fixtures.
8. Back to the last menu, please press ESC/CLEAR Button.
5.11 Read CF card
If you have stored program files (???????.PRO) or bank files (????????.CIF) in the directory of DIR2420
which under the root directory of CF card, then you can read them out by this function. And you have to patch
the profile in order to use it normally. Every time read the CF card, please don’t move it, or the card or the files
will be damaged. The format of the CF card should be FAT, else you have to convert it to FAT by PC, and copy
it to CF card.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 11. Read cf card is shown on the monitor. Press
ENTER/MAIN MENU button to enter.
3. Use Jog wheel #1 to read the program file 01. Load program file or profile file 02.
Load a fixture profile. Press ENTER/MAIN MENU button to enter.
4. The list of the program/profile files will show on the LCD, turn jog wheel #1 to select
the file name. The amount of the files consider to the amount of the program or
profile files which you saved under the directory of DIR2420 in the CF card.
