22
10. Press number button 1-20 to select the opened Preset, all LEDs blink for 3 times to
indicate that you have successfully edited the Preset.
11. Press PROGRAM button for 3 seconds to exit Program mode, the LED goes out
indicating this operation.
NOTE:
If you press different buttons in step 4 and 10, the preset in step 4 will cover the one in step 10.
4.16 Program a Fixture Group
1. Enter Program mode.
2. Press FIXTURE button.
3. Press the number button1-20 to select one or more fixtures to make the fixture
group.
4. Press MANUAL/REC button, at this moment, all LEDs on CUE, OVERRIDE,
CENTRE, FIXTURE GROUP, PRESET, CHASE, BANK, BLACKOUT blink at the
same time.
5. Press FIXTURE GROUP button.
6. Press the number button 1-20 to select the number of the fixture group for store, all
LEDs blink for 3 times
7. Repeat steps 2-6 to edit more fixture groups.
