10
11. If you don‘t intend to continue your programming, press and hold down the
PROGRAM button for three seconds to exit Program mode, the LED goes out
indicating this selection.
4.4 Program a Scene
1. Enter Program mode.
2. Press the button BANK, to turn on its fader control, which is indicated by the lit LED,
use Jog wheel #1 to select the bank number to edit the scene.
3. Press the number button 1-20 to open the scene you are going to edit.
4. Move Faders 1-24 or use the CENTRE, PRESET, SCENE have saved to change
the output of each channel, you can also use the Jog wheel #1, #2 to adjust PAN,
PAN FINE, or use Jog wheel #3, #4to adjust TILT, TILT FINE or press MOVEMENT
to add MOVEMENT function.
5. Press MANUAL/REC to store, LEDs on CUE, OVERRIDE, CENTRE, FIXTURE
GROUP, PRESET, CHASE, BANK, BLACKOUT blink at the same time.
6. Press the button BANK.
7. Press the number button 1-20 to store the edited scene which will cover the former
scenes, all LEDs and the Segment Display will blink for three times briefly indicating
this operation, then the LCD will show the bank and the scene number of the
programmed scene.
