Stahl 8146/5-V37 Series, Руководство по эксплуатации

Страница: 88 / 96

Installation
40
147924 / 8537608300
2014-01-13·BA00·III·en·04
Safety switch
8146/5-V37 8150/5-V37
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
12442E00
- Position the protection against accidental contact (8) over the main terminal, the
clamping plate and the conductor.
Cable lug connection for 8146/5-V37-.09/10/08-... and 8150/5-V37-.09/10/08-...

Dismounting is carried out in reverse order.
WARNING
Danger due to conducting metal parts!

If a cable lug connection is used, the conducting metal parts are located outside the
switch.

Only operate the switch with installed protection against accidental contact!
WARNING
Danger due to twisted cable lug connection!

Mechanical load on the cable may cause twisting of the cable lug connection on the
clamping plate. Protection against accidental contact ensures anti-twist protection.

Only operate the switch with installed protection against accidental contact or with a
separate anti-twist protection!
WARNING
Danger due to conducting metal parts in case of single conductor connection or conduc
-
tors of small cross-section!

If only one conductor or at least one conductor with a cross-section
(
70 mm
2
/ AWG
-1 is used, it is possible to come into contact with conducting metal parts even if the
protection against accidental contact is mounted since the openings of the protection
are not sealed completely.

To obtain the degree of protection IP20, mount a suitable covering in addition to the
protection against accidental contact.

For permissible conductor cross-sections refer to "Technical Data".
8