manualshive.com logo in svg

Staheli West DewPoint 331, Руководство пользователя, Страница: 74 / 216

Поделиться
Скачать
Staheli West DewPoint 331 Скачать руководство пользователя страница 74

©  2021 Staheli West

65

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Raking

Rake Adjustments and Maintenance

 

□

Your hay rake should be set to sweep the crop from the ground without the rake teeth touching the 

soil.  This requires careful daily attention to rake adjustment.

• 

If rake teeth are set too low, dirt and/or dust will be raked into the hay.  This increases the 
“ash” content in your hay, which decreases the feed value numbers on your hay tests. This also 
decreases the monetary value of your crop. 

• 

If rake teeth are set too high, you will leave valuable crop tonnage on the ground in the field.

 

□ Maintaining rake teeth and the rake in general, and careful daily adjustment, are worth the effort.

Содержание DewPoint 331

























































































































































































































Отзывы:

Нет отзывов