manualshive.com logo in svg

Staheli West DewPoint 331, Руководство пользователя, Страница: 175 / 216

Поделиться
Скачать
Staheli West DewPoint 331 Скачать руководство пользователя страница 175

©  2021 Staheli West

166

Tes

ts

Tes

ts

Main

tenance

Main

tenance

Tr

oubleshooting

Tr

oubleshooting

Technic

al 

In

forma

tion

Technic

al 

In

forma

tion

Oper

ation

Oper

ation

Pr

e-Oper

ation

Requir

emen

ts

Pr

e-Oper

ation

Requir

emen

ts

Sa

fe

ty
Sa

fe

ty

Before you begin, turn the valve to the fully closed position.

Be careful not to damage the surfaces on the valve where the seats will need to seal.

 

1. Remove the retainer nut from the end of the  valve and remove the outer seat and the ball (the ball    

 

  must be in the closed position before it can be removed).

 

2. Remove the retainer nut on the stud at the top of the valve.

 

3. Remove the stud and the inner seal by pressing the stud down into the valve and out the end.

 

4. Remove the outer seal.

 

5. Remove the inner seat.

*To re-assemble, do these steps in reverse with the new parts.

Test 1004: Valve Repair

Содержание DewPoint 331

























































































































































































































Отзывы:

Нет отзывов