Staheli West DewPoint 331 Скачать руководство пользователя страница 12

Страница: 12 / 216

Warranty Information

All DewPoint machines come with a 1-Year Limited Warranty. This voluntary manufacturer’s warranty covers

everything on the machine against manufacturing defects. Normal wear-and-tear items and problems caused

by operator negligence or operator error are not covered.

The warranty period for the DewPoint machine starts from the date of first use.

Staheli West Parts offers a 1-year warranty on all parts from the date of purchase. Staheli West Parts does not

cover labor costs of replacing a warrantied part.

Warranty will not be honored if routine maintenance has not been performed.

To ensure warranty coverage, use only OEM parts and filters.

DewPoint Machine

Warranty Period

Coverage

Months

Hours

Parts

Labor

0-12

Unlimited

100%

Содержание DewPoint 331

























































































































































































































Результаты поиска

Содержание DewPoint 331

Отзывы:

Staheli West DewPoint 331, Руководство пользователя, Страница: 12 / 216

Результаты поиска

Содержание DewPoint 331

Отзывы: