14
7.
Install the lithium battery (in small bike support) by
aligning the positive and negative terminals on the console
to the ones on the battery. Make sure that the positive tab
on the battery is on the inside of the console and then with
both of your thumbs, press down on the battery and it will
lock the lithium battery into the console.
Note: During
install of the battery, if one of the blue tabs breaks off of
the console, don’t worry, it will still work.
8.
Plug the generator wire from the bike into the one from the
back of the battery.
Note: This wire will only connect one way
(it is color coded) and should click when it is properly installed.
9.
Install the console onto the console base (making sure to feed
all of the wires and connector into the middle channel of the
console base) and then push down on the front of the console until
you hear it click into place.
Note: If you don’t ensure that the
wires are in the center channel of the console base, it can pinch,
cut or not allow you to install the console.
