Form No. 003-2282 Rev G
26
3.5.1.16. Press
key pad to scroll through the screens to check the UPS
settings. The LCD display will change, in sequence, from Drawing
Q1(alarm/buzzer)
Drawing R1(Self-test)
Drawing S1(Bypass
Voltage Windows)
Drawing T(Output Frequency Synchronization
Window)
Drawing U(Inverter Output Voltage)
Drawing V1(UPS
Operation Mode)
Drawing W(Output Voltage Micro Tune Value)
Drawing X(UPS Id)
Drawing Y(Parallel function status).
R1
* Display shows self-
test is NOT “on”.
R2
* Display shows self-test is
“On”.
S1
* Display shows Bypass Voltage window is adjusted to narrow range.
S2
* Display shows bypass voltage window is adjusted to wider range.
