Form No. 003-2282 Rev G
23
Check Measured operating parameters detected by the UPS
3.5.1.14. If you would like to check the operating parameters of the UPS, use the
scroll down
and scroll up
key pads. When you use the scroll
down key pad, the LCD display will show as in Drawing C(Voltage from
Utility Input)
Drawing I1(Voltage from Bypass Input)
Drawing
J(Frequency from Utility Input)
Drawing K(Frequency from Bypass
Input)
Drawing L(Inverter Output Voltage, for units without isolation
transformer this is also the “UPS” Output)
Drawing M(UPS Output
Frequency)
Drawing N(UPS Output Load %)
Drawing O(UPS
Battery Voltage)
Drawing P(UPS Inner Temperature).
I1
* Display shows voltage at the Bypass Input
J
* Display shows frequency from the Utility Input.
K
* Display shows frequency from the Bypass Input.
