Form No. 003-2282 Rev G
20
B.
3.5.1.5. The UPS is now in Bypass Mode and it will proceed to self-test
automatically. If there are no abnormal messages then the self-test was
successful and the charger starts to charge the batteries.
3.5.1.6. Press the UPS On Switch
for approx. 3 seconds, then the alarm
sounds twice and the LCD display changes from drawing B to drawing C.
C
3.5.1.7. The UPS performs another self-test and the LCD display will change
from drawing C to drawing D, running in battery mode for approx. 4
seconds, then the display will change from drawing E1 to drawing F if
the self-test is successful.
D
* Display shows
“test”.
E1
* Display shows
“OK” in self-test
