Stack Dash-2, Руководство пользователя

Страница: 44 / 52

7. Troubleshooting STACK Dash-2 Kart Logger
38 Users Guide
7. Troubleshooting 7. Troubleshooting
Symptom Possible Cause Remedy Notes
Display is dead Power switch is off Turn on
Battery is dead Recharge or replace
battery
Power connection
is faulty Check if battery is
connected correctly. Check
power lead continuity
!! LOW BATT !!
warning on display Battery is almost
dead Recharge or replace
battery
Power connection
is faulty Check power lead
continuity
Display flashes and dial
pointer resets or
vibrates Battery is almost
dead Recharge or replace
battery
Power connection
is faulty Check power lead
continuity
Display gives a fixed
temperature reading Temperature
sensor has failed Replace sensor Disconnect
sensor.
Faulty sensor
connections Check continuity of sensor
leads Check harness
for short circuit
Display gives a fixed
reading of 0
°
C or 0
°
F
when temperature is
above 70
°
C or 160
°
F
A temperature
sensor has failed Replace sensor
Faulty sensor
connections Check continuity of sensor
leads for open circuits.
All sensors show fixed
high values Switch 1 (Peaks)
faulty Return unit for repair
Peak values not updated Gate value set too
high
Change Gate RPM in the
display configuration menu
Internal memory
battery dead Return unit to Stack for new
battery service Display shows
!!MEM BATT!!
warning on power
up