Error! Main Document Only.6. Installing the Dash-2 Kart Logger
STACK Dash-2 Kart Logger
26
Users Guide
6. Installing the
6. Installing the
Dash-2
Dash-2
Kart Logger
Kart Logger
Fitting the Display Module
The
Dash-2
Kart Logger is fitted to the kart with the two brackets on the bottom of the unit mounting onto the steering column and
the two tapped inserts take screws through the Nassau panel.
Procedure
1.
Cut holes in the sides of the panel to allow the infrared receiver
to see the trackside beacon, and to allow the download cable to
be attached. Drill two 6mm clearance holes in the face of the
panel to take the two fixing screws.
1.
The lower brackets are supplied with a number of holes for the
column fixing bolts. Choose the fixing hole which gives the driver
the best view of the dash. Once chosen, the excess bracket may
be cut off to give a neat installation.
There must be no strain on the brackets after fitting. Take
special care that the brackets are parallel with each other.
