STACK Dash-2 Kart Logger
3. Operating the Dash-2 Kart Logger
Users Guide
7
3. Operating the
3. Operating the
Dash-2
Dash-2
Kart Logger
Kart Logger
This section takes you through the operation of the
Dash-2
Kart Logger so that you can familiarise yourself with its use before you
install it in the kart.
Switches
4 switches are used to control the functions of the
Dash-2
Kart Logger.
Switches 1 & 2 on the left side of the Dash-2 are used for changing the
displayed channels. Press and hold switch 1 to show the recorded peaks.
Press switch 2 to change the display layer. This is the only switch the
driver needs to use when driving the kart.
Switches 3 and 4 are used for manual control of the Dash-2. Press
switch 3 to turn logging on and off. Press switch 4 to create a lap
marker.
Summary of switch functions
Switch 1
Switch 2
Switch 4
Switch 3
Switch
Functions
Switch 1 pressed
Show Peak Values
Switch 2 pressed
Change Display Layer/Clear
Alarm
Switch 3 pressed
Turn Recording On/Off
Switch 4 pressed
Manual Lap Marker
Switch 1 Held Down followed by:
Switch 2 pressed
Enter SETUP mode.
Switch 3 pressed
RESET Logger (Erase Memory)
Switch 4 pressed
RESET Peaks & Laptimes
