Error! Main Document Only.6. Installing the Dash-2 Kart Logger
STACK Dash-2 Kart Logger
30
Users Guide
Fitting the Water Temperature sensor
The Display System is supplied with different sensors requested at time of ordering, according to the thread size required. Your
system may be supplied with either ST 760, ST761, ST762, or ST764.
The ST760 temperature sensor has a 1/8" BSP taper thread.
The ST761 temperature sensor (not normally used) has an M14 x 1.5 thread.
The ST762 temperature sensor has an M10 x 1 thread (UK, EC versions).
The ST764 temperature sensor has two terminals and a 1/8" NPTF thread (U.S. version)
If you find that you have a sensor with an incorrect thread, please return it unused to
Stack for replacement.
Procedure
1.
Mount each temperature sensor directly in the appropriate fluid line.
2.
Screw the sensor into a suitable mounting boss, so that its end lies in the middle of the flow of fluid.
3.
Position the sensors and their cables as far as possible from sources of intense heat and from the ignition HT leads.
4.
Connect the sensor to the plug marked TMP on the Dash-2.
ST760 ST761
ST762 or ST764
